tlp150 series single output total power: 150 watt input voltage: 85 - 264 vac # of outputs: single special features ? 150 w on main channel with only 200 lfm ? low profle fts 1u applications ? active pfc and en61000-3-2 compliant ? integrated or-ing diode ? active current sharing ? integrated control and monitoring features ? overcurrent, overvoltage and overtemperature protection ? compliance to en55022-b conducted noise standard ? 12 v fan output ? 5 v standby output (optional) ? rohs compliant ? two year warranty safety ? tuv en60950-1/iec60950-1 ? ul60950-1/csa22.2 no.60950-1 electrical specifcations output adjustment range 10% total regulation (line and load) main output auxiliary outputs fan output 3% 5% 10% turn-on delay @120 vac input 2.0 s max. transient response main output 25% to 75% step at 0.5 a/s 5% max. dev., 1 ms max. recovery to 1% temperature coeffcient 0.02%/c overvoltage protection main outputs 125% 5% short circuit protection current limited continuous minimum output current singles 0 a fan voltage output see note 9 12 v @ 0.5 a standby output see note 9 5 v @ 1.0 a input input voltage range universal input 85 - 264 vac input frequency range 47 - 63 hz input surge current 264 vac (cold start) 40 a max. safety ground leakage current 264 vac, 50 hz 1 ma input current 100 vac @ 250 w 120 vac @ 250 w 230 vac @ 250 w 2.5 a rms 1.8 a rms 0.8 a rms input fuse ul/iec127 t 3.15 a, 250 vac data sheet power
emc characteristics conducted emissions en55022, fcc part 15 level b harmonic current correction en61000-3-2 compliant esd air en61000-4-2 level 3 esd contact en61000-4-2 level 3 fast transients en61000-4-4 level 4 surge en61000-4-5 level 3 conducted immunity en61000-4-6 level 3 general specifcations hold-up time 85 vac @ 60 hz 20 ms @ 150 w effciency 115 vac @ 150 w 230 vac @ 150 w 81% typ. 84% typ. isolation voltage input/output input/chassis 3000 vac 1500 vac safety approvals (see note 6) ul/cul ul60950-1/csa22.2 no. 60950-1 vde en60950-1/iec60950-1 weight 260g (9.2 oz) mtbf (@25 oc) telcordia sr-332 mil-hdbk-217f 900,000 hours min. 350,000 hours min. environmental specifcations thermal performance operating ambient, (see derating curve) 0 c to +70 c non-operating -40 c to +85 c 0 c to 50 c ambient, 200 lfm forced air 150 w 0 c to 50 c ambient, convection cooled 100 w 50 c to 70 c ambient, derate linearly to 50% load relative humidity non-condensing 5 - 95% rh altitude operating 10,000 feet max. non-operating 30,000 feet max. vibration (see note 7) 5 - 500 hz 2.4 g rms peak shock per mil-std-810e 516.4 part iv lps100-m series data sheet
tlp150 series data sheet ordering information output voltage output currents ripple (3) total regulation model numbers (8, 10) min max (free air) (1, 4) max (forced air) (2, 4) 12 v 0 a 8.4 a 12.5 a 120 mv 3.0% tlp150r-96s12j 24 v 0 a 4.2 a 6.3 a 240 mv 3.0% tlp150r-96s24j 36 v 0 a 2.7 a 4.2 a 360 mv 3.0% tlp150r-96s36j 48 v 0 a 2.1 a 3.2 a 480 mv 3.0% TLP150R-96S48J notes 1 free air convection. maximum continuous output power not to exceed 100w. refer to figure 1 for the derating curve. 2 200 lfm forced air cooling from the ac input side. maximum continuous output power not to exceed 150 w. 3 figure is peak-to-peak for room temperature rating. output noise measurements are made across a 20 mhz bandwidth using a 6 inch twisted pair, terminated with a 10 f tantalum capacitor and a 0.1 f ceramic capacitor. 4 caution: allow a minimum of 1 second after disconnecting line power when making thermal measurements. for optimum reliability no part of the heatsink should exceed 115 c and no semi-conductor case temperature should exceed 120 c. 5 no external fltering required during conducted emissions testing but some applications may require additional fltering to achieve system compliance. compliance with radiated emi specifcations may require mounting in a suitable enclosure. 6 this product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 7 three orthogonal axes, random vibration 10 minutes for each axes, 2.4 g 8 replace the j at the end of the model number with fj when the optional standby output and/or remote on/off control is required e.g. tlp150r-96s12fj. 9 12 v (fan) present when main output is present. an optional 5 vsb (standby) output is available whenever ac input is present, regardless of remote on/off signal status. 10 the j suffx indicates that these parts are pb-free (rohs 6/6) compliant. 11 notice: some models do not support all options. please contact your local artesyn embedded technologies representative or use the on-line model number search tool at www.artesyn.com/power. 12 power good signal required 100 ma load on the main output (check with engineering on all models). 13. this product is a component power supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. emc compliance to appropriate standards must be verifed at the system level. this product is for sale to oems and system integrators, including through distribution channels. it is not intended for sale to end users. dera ting cur ve output power (w atts) figur e 1: derating curve 0 c 10 c 20 c 30 c 40 c 50 c 60 c 70 c 100 w 150 w 200 lfm (1.0 m/s) forced air cooling na tural convection cooling 50 w 75 w 0 w figure 2: mechanical drawing dimensions in inches (mm) ?0.156 (4 places) 0.225 (5.72) 0.225 (5.72) j3 1 fa n 1 j4 4.550 (115.57) 5.000 (127.00) 3.000 (76.20) 2.550 (64.77) j1 j2 1 1.250 (31.75) outline dimensions 1 1 j301 t otal height r88 t rimmer adjust output vo ltage gr ound/earth neutral live figure 1: derating curve
worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 tlp150 series data sheet tlp150 ds 22mar2016 connector and mating connector types connector type mating connector type j1 molex 09-65-2038 (5273 series) void pin 2 or equivalent molex 09-52-4034 (5239 series) or equivalent with molex 08-52-0072 (2478 series) or equivalent crimp terminals j2 amp 63849-1 or equivalent (6.35 mm straight) amp 2-520263-4 or equivalent (straight spade for 22-18 awg wire) j3 molex 09-65-2068 (5273 series) or equivalent molex 09-52-4064 (5239 series) or equivalent with molex 08-52-0072 (2478 series) or equivalent crimp terminals j4 molex 22-23-2061(6373 series) or equivalent molex 22-01-3067 (2695 series) or equivalent with molex 08-50-0113 ( 2759 series) or equivalent crimp terminals j301 (optional) leoco 2421p04h000 (2421 series) or equivalent leoco 2420s04000 (2420 series) or equivalent with leoco 2453tpb00v1 (2453t series) or equivalent crimp terminals or jst ehr-4 (eh series) or equivalent with jst seh-001t-p0.6 (eh series) or equivalent crimp terminals fan molex 22-23-2021(6373 series) or equivalent molex 22-01-3027 (2695 series) or equivalent with molex 08-50-0113 (2759 series) or equivalent crimp terminals pin connections j1 pin connections pin 1 neutral pin 2 live j2 tab connections ta b ground/earth pin connections j4 pin connections pin 1 -s -vo remote sense pin 2 dc ok dc power good signal pin 3 pw ok power good* pin 4 ls load share signal pin 5 +s +vo remote sense pin 6 sgnd signal common j301 pin connections (optional) pin 1 5 vsn standby voltage pin 2 sgnd signal common pin 3 reserved do not connect pin 4 ps off remote on/off signal fan pin connections pin 1 + 12 v fan voltage pin 2 +sgnd return pin connections j3 pin connections pin 1 rtn main return pin 2 rtn main return pin 3 rtn main return pin 4 vo +main output pin 5 vo +main output pin 6 vo +main output for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2016 artesyn embedded technologies, inc. all rights reserved. for full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com
|
